• Home
  • About Us
  • Contact Us
  • CHINA Bearing
  • FAG Bearing
  • TIMKEN Bearing
  • INA Bearing
  • NSK Bearing
  • Automotive Bearing
  • All Bearing
  • Bearing Search
  • Cylindrical roller Bearings

    Cylindrical roller bearing

    Cylindrical rollers and raceways are line contact bearings. Load capacity, mainly bear radial load. The rolling element has little friction with the ferrule rib and is suitable for high speed rotation. According to the ferrule with or without ribs, it can be divided into single row cylindrical roller bearings such as NU, NJ, NUP, N, NF, and double row cylindrical roller bearings such as NNU and NN. The bearing is a structure in which the inner ring and the outer ring are separable.

    Cylindrical roller bearings with no ribs on the inner or outer ring, the inner and outer rings can move relative to the axial direction, so they can be used as free end bearings. A cylindrical roller bearing with a single rib on one side of the inner and outer rings and a single rib on the other side can withstand a certain degree of axial load in one direction. Steel stamping cages or copper alloy solid cages are commonly used. However, some use polyamide shaped cages.

    Characteristics
    1. The roller and the raceway are in contact with the wire or repaired, and have a large radial load capacity, which is suitable for bearing heavy loads and impact loads.
    2. The friction coefficient is small, suitable for high speed, and the limit speed is close to the deep groove ball bearing.
    3. N-type and NU-type can move axially, can adapt to the change of the relative position of the shaft and the shell caused by thermal expansion or installation error, and can be used as free end support.
    4. The machining requirements of the shaft or the seat hole are high. After the bearing is installed, the relative deflection of the outer ring axis should be strictly controlled to avoid contact stress concentration.
    5. The inner or outer ring can be separated for easy installation and disassembly.

    Cylindrical roller bearing category
    Cylindrical roller bearings are separate bearings that are easy to install and disassemble. Cylindrical roller bearings can withstand large radial loads and are suitable for use in high speed applications.
    This type of bearing allows the angular error (inclination) of the inner ring axis and the outer ring axis to be small, only 2' to 4'. Therefore, the machining accuracy of the shaft and the bearing housing is relatively high, otherwise uneven load or stress concentration is likely to occur at the contact portion of the raceway. However, the correction of the roller or raceway contact busbar can reduce the occurrence of stress concentration.
    Cylindrical roller bearings can be divided into single-row, double-row and multi-row cylindrical roller bearings according to the number of rows of rolling elements. Different structural bearings are also shown in the design of the ribs. Among them, cylindrical roller bearings are commonly used in the following forms:
    Single row cylindrical roller bearings: Single row cylindrical roller bearings are separable bearings for easy installation and disassembly. Both ferrules can be tightly fitted. The modified contact line between the roller and the raceway reduces stress concentration.
    Double row cylindrical roller bearings: Double row cylindrical roller bearings are floating bearings, and their separability makes installation and disassembly convenient. A tight fit can be used for both ferrules. Double row cylindrical roller bearings have almost no inclination angle.

    Single row bearing
    N, NU type
    The outer ring of the N-type bearing has no ribs, and the inner ring has ribs on both sides. It is possible to allow displacement of the shaft in the axial direction relative to the bearing housing. The NU type bearing has a rib on both sides of the outer ring, and the inner ring has no ribs. It is also possible to allow displacement of the shaft in the axial direction relative to the bearing housing. Therefore, this type of structure is suitable for use as a swim end bearing.
    NJ, NF type
    NJ-type bearings have ribs on both sides of the outer ring, and the inner ring has ribs on one side. Can withstand a certain amount of one-way axial load. The outer ring of the NF type has a rib on one side and a rib on both sides of the inner ring. It can also withstand a certain amount of one-way axial load. Therefore, this type of structure is suitable for use as a unidirectional axially oriented bearing.
    NUP, NFP type
    The NUP type bearing has a rib on both sides of the outer ring, a (fixed) single rib on one side of the inner ring, and a detachable flat ring on the other side. Can withstand a certain amount of bidirectional axial load.
    The NFP type bearing has a (fixed) single rib on one side and a detachable flat ring on the other side, and ribs on both sides of the inner ring. It can also withstand a certain amount of bidirectional axial load. Such structural bearings can limit the displacement of the shaft in both axial directions relative to the bearing housing. Therefore, it is suitable for use as a fixed end bearing.
    NH(NJ+HJ) type
    The NH type bearing is a combination of the NJ type bearing and the HJ type slanting ring. Since the inner ring of the NUP type bearing is short, and the flat ring is not fixed, it is inconvenient to use, and the NH type bearing can utilize the width of the entire inner ring of the NJ type bearing to maintain a tighter fit with the shaft. Moreover, the NH type bearing is more convenient to install and disassemble.
    The NH type bearing can limit the displacement of the shaft in the axial direction relative to the bearing housing. Therefore, it is suitable for use as a fixed end bearing.

    Double row bearing
    Double row cylindrical roller bearings have a cylindrical inner bore and a conical inner bore (bearing rear code plus K). This kind of bearing has the advantages of compact structure, large rigidity, large bearing capacity, small deformation after load, etc., and is especially suitable for machine tool spindle support. The conical inner hole can also play a role of slightly adjusting the play, and can simplify the structure of the positioning device, and is convenient for installation and disassembly. Commonly used double row cylindrical roller bearings have the following forms:
    NN, NNU type
    The outer ring of the NN bearing has no ribs, and the inner ring has a middle rib in the middle of the rib. It is possible to allow displacement of the shaft in the axial direction relative to the bearing housing in both directions.
    NNU-type bearings have a middle rib on the outer side of the rib on both sides, and the inner ring has no rib. It is possible to allow displacement of the shaft in the axial direction relative to the bearing housing in both directions. Therefore, such a structure is suitable as a swim end bearing. Most of the cages of this type of bearing use a vehicle-made solid cage.
    NNF type
    The NNF type bearing is a double row full complement cylindrical roller bearing. The bearing consists of a structure with a middle rib outer ring and two double rib inner rings. The rollers are guided by the ribs of the inner ring and the two inner rings are fastened together by fastening rings. In addition to being able to withstand large radial and axial loads, the structure can withstand overturning moments and is therefore often used as a fixed end bearing.
    Contact seals are used on both sides of the NNF type bearing. The bearings are filled with grease. The operating temperature of the grease is -50 ° C to +110 ° C, but due to the limitations of the sealing material, the operating temperature of the bearing is limited to -40 ° C to +80 ° C. In the case of better working conditions, the sealed NNF bearing does not need maintenance. If the bearing is in water vapor or polluted environment for a long time, and it is running at medium and high speed, it can pass through the lubricating oil groove and the lubricating oil hole on the outer ring. The bearings are relubricated.

    Four row bearing
    Four-row cylindrical roller bearings are mainly used in rolling mill machinery such as cold and hot rolling mills and blanking machines. The bearings are separated structures, and the bearing rings and rolling element assemblies can be easily separated. Therefore, the bearings are cleaned, inspected or It is very convenient to install and disassemble.
    FC type
    The FC type bearing is composed of two outer rings and one inner ring, and each of the outer rings has a middle rib in the middle of the rib, and the inner ring has no rib.
    FCD type
    The FCD type bearing is actually a combination of two NN type bearings.
    FC and FCD bearings allow for axial displacement in the axial direction relative to the housing. Therefore, such a structure is suitable as a swim end bearing. The cage of this type of bearing mostly uses the car body 13:58.

    Company:Hangzhou BFW Bearing Manufacturing Co., Ltd.
    Company Address: No.501 Shiting Road, Dongxi Road,Hangzhou, Zhejiang, China
    Tel: +86-0578-2699292
    Fax: +86-0578-2699292
    Zip/Postal Code: 323000
    Email:admin@bearingforworld.com
    Contact Person: Mr. William

    Copyright © 2018 Hangzhou BFW Bearing Manufacturing Co., Ltd. All rights reserved. Email: admin@bearingforworld.com